热塑性丁苯橡胶是一种高强度、高耐热性的弹性材料，常用于制造O型密封圈、密封垫片、管道接头等密封产品。氢氧化钾厂家提醒，有关人员在使用热塑性丁苯橡胶时，需要注意以下几点，避免对其性能和寿命造成影响：

Thermoplastic styrene butadiene rubber is a high-strength and heat-resistant elastic material commonly used in the manufacturing of sealing products such as O-ring seals, sealing gaskets, and pipeline joints. Potassium hydroxide manufacturers remind relevant personnel to pay attention to the following points when using thermoplastic styrene butadiene rubber to avoid affecting its performance and lifespan:

避免与油类或有机溶剂接触：热塑性丁苯橡胶对油类或有机溶剂具有一定的溶胀性，长时间接触会使其性能发生变化，导致密封不良或失效。

Avoid contact with oil or organic solvents: Thermoplastic styrene butadiene rubber has a certain degree of swelling ability towards oil or organic solvents, and long-term contact can cause changes in its performance, leading to poor sealing or failure.

避免高温环境：虽然热塑性丁苯橡胶具有较高的耐热性，但在高温环境下长时间使用会使其性能下降，严重时还可能导致热塑性丁苯橡胶变形或熔化。

Avoid high temperature environments: Although thermoplastic styrene butadiene rubber has high heat resistance, prolonged use in high temperature environments can lead to a decrease in its performance, and in severe cases, it may also cause deformation or melting of thermoplastic styrene butadiene rubber.

避免环境中含有强酸、强碱或氧化剂等化学物质：热塑性丁苯橡胶容易被强酸、强碱或氧化剂等化学物质腐蚀，导致其失去弹性或变硬。

Avoid chemicals such as strong acids, alkalis, or oxidizing agents in the environment: Thermoplastic styrene butadiene rubber is easily corroded by chemicals such as strong acids, alkalis, or oxidizing agents, causing it to lose elasticity or become hard.

注意存储条件：热塑性丁苯橡胶在存储条件不当的情况下会被氧化，导致性能下降。因此需要在阴凉、干燥、不受阳光直射的地方存放，并避免受到潮湿、高温、酸碱等影响。

Pay attention to storage conditions: Thermoplastic styrene butadiene rubber can be oxidized under improper storage conditions, leading to a decrease in performance. Therefore, it is necessary to store in a cool, dry place that is not directly exposed to sunlight, and to avoid being affected by moisture, high temperature, acidity, and alkalinity.

总之，在使用热塑性丁苯橡胶时，需要注意避免与油类、有机溶剂、强酸、强碱、氧化剂等化学物质接触，避免高温环境和不当的存储条件，以确保其佳性能和使用寿命。欢迎您随时来我们网站http://www.jinhao360.com咨询！

In summary, when using thermoplastic styrene butadiene rubber, attention should be paid to avoiding contact with chemicals such as oils, organic solvents, strong acids, alkalis, oxidizing agents, etc., avoiding high-temperature environments and improper storage conditions to ensure its excellent performance and service life. Welcome to our website anytime http://www.jinhao360.com consulting service